FED-STD-001031 - General Purpose 37-Position And 9-Position Interface Between Data Terminal Equipment And Data Circuit-Terminating Equipment (S/S By Fips Pub 143)
FED-STD-001033 - Telecommunication, Digital Communication Performance Parameters
FED-STD-001041 - Interface Between Data Terminal Equipment & Data Circuit-Terminatine Equipment For Operation With Packet-Switched Data Telecommunications Networks
FED-STD-1001 - Telecommunications, Synchronous High Speed Data Signaling Rates Between Data Terminal Equipment And Data Communication Equipment
FED-STD-1002 - Time And Frequency Reference Information In Telecommunication Systems
FED-STD-1003 - Telecommunications, Synchronous Bit Orientated Data Link Control Procedures (Advanced Data Communication Control Procedures
FED-STD-1005 - Telecommunications, Coding And Modulation Requirements For Nondiversity 2400 Bit/Second Modems
FED-STD-1006 - Telecommunication, Coding And Modulation Requirements For 4800 Bit/Second Modems
FED-STD-1007 - Telecommunications, Coding And Modulation Requirements For Duplex 9600 Bit Second Modems
FED-STD-1008 - Telecommunication, Coding And Modulation Requirements For Duplex 600 And 1200 Bit/Second Modems
FED-STD-1010 - Telecommunications, Bit Sequencing Of The American National Standard Code For Information Interchange In Serial By Bit Data Transmission
FED-STD-1011 - Telecommunication, Character Structure And Character Parity Sense For Serial By Bit Data Communication In The American National Standard Code For Information Interchange
FED-STD-1012 - Telecommunications, Character Structure And Character Parity Sense For Parallel By Bit Data Communication In The American National Standard Code For Information Interchange
FED-STD-1013 - Telecommunications, Synchronous Signaling Rates Between Data Terminal Equipment And Data Circuit Terminating Equipment Utilizing 4Khz Circuits
FED-STD-1015 - Telecommunications: Analog To Digital Conversion Of Voice By 2,400 Bit/Second Linear Predictive Coding
FED-STD-1016 - Telecommunications: Analog To Digital Conversion Of Radio Voice By 4,800 Bit/Second Code Excited Linear Prediction (Celp)
FED-STD-1020 - Telecommunication, Electrical Characteristics Of Balanced Voltage Digital Interface Circuits
FED-STD-1023 - Telecommunications, Interoperability Requirements For Encrypted, Digitized Voice Utilized With 25 Khz Channel Fm Radios Operating Above 30 Mhz
This standard establishes interoperability requirements regarding the analog to digital conversion, encryption (with related synchronization), and modulation of encrypted voice associated with Frequency Modulation (FM) radio systems employing 25 kHz channels and operating above 30 MHz. In this standard, voice is digitized using 12 kbit/s Continuously Variable Slope Delta -modulation (CVSD) and then encrypted using a National Security Agency (NSA) Commercial COMSEC Endorsement Program (CCEP) Type I encryption algorithm.
FED-STD-1026 - Interoperability And Security Requirements For Use Of The Data Encryption Standard In The Physical Layer Of Data Communications
This standard specifies interoperability and security related requirements for using encryption at the Physical Layer of the ISO Open Systems Interconnection (OSI) Reference Model in telecommunication system conveying Automatic Data Processing (ADP) and/or narrative text information.
FED-STD-1027 - General Security Requirements For Equipment Using The Data Encryption Standard
FED-STD-1028 - Telecommunications: Interoperability And Security Requirements For Use Of The Data Encryption Standard With Ccitt Group 3 Facsimile Equipment
This standard specifies interoperability and security related requirements for the use of encryption with CCITT i.e., International Telegraph and Telephone Consultative Committee) Group 3-type facsimile equipment. The algorithm used for encryption is the Data Encryption Standard (DES), described in Federal Information Processing Standards Publication 46. Requirements contained in section 3 below relate to the interoperation of DES Cryptographic Equipment, or their operation with associated CCITT Group 3 facsimile equipment. Additional security requirements, not directly relating to interoperability, are contained in Federal Standard 1027.
FED-STD-1030 - Telecommunication, Electrical Characteristics Of Unbalanced Voltage Digital Interface Circuits
FED-STD-1031 - Telecommunication, General Purpose 37 Position And 9 Position Interface Between Data Terminal Equipment And Data Circuit Terminating Equipment
FED-STD-1035 - Telecommunications, Coding, Modulation And Transmission Requirements For Single Channel Medium And High Frequency Radiotelegraph Systems Used In Government Maritime Mobile Telecommunications
FED-STD-1037 - Telecommunications: Glossary Of Telecommunication Terms
This glossary provides standard definitions for the fields subsumed by the umbrella discipline of telecommunications.
FED-STD-1041 - Interface Between Data Terminal Equipment (Dte) And Data Circuit-Terminating Equipment (Dce) For Operation With Packet-Switched Data Communications Networks
FED-STD-1061 - Telecommunications, Group 2 Facsimile Apparatus For Document Transmission
FED-STD-1062 - Telecommunications, Group 3 Facsimile For Document Transmission
FED-STD-1063 - Procedures For Document Facsimile Transmission
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business